Need Help Removing The Jacob Chuck From A Makita Cordless Drill?

by William on June 17, 2009


My drill chuck is slipping and I need to change it. Do you know how to remove one?

Tagged as: , , , , , , , ,

{ 2 comments }

Handy but Perplexed June 17, 2009 at 10:33 am

Open the chuck jaw fully and look into the base of the chuck. A phillips or slotted screwdriver can be placed in the chuck, jaws closed and then turn the screw driver counterclockwise.

J P June 17, 2009 at 10:33 am

You should be able to stick a screwdriver in the cooling fan on the back of the drill to hold the shaft then just unscrew the chuck.

Comments on this entry are closed.